top of page

About Us
Services
Past Projects
Shop

2T loop in basket

SWL 2000kg

BL 6000kg

Saftey factor x3

Bearing to bearing 100mm

Other lengths available please contact us for more information

2T loop in basket

$75.00Price

Color*

Quantity*

Fixing a tricky one onboard Yam2

We were asked to solve an ongoing issue with the waterproof covers over the large @harken_inc backstay rams. When those rams load up, the shaft moves — and the original covers didn’t allow for that movement.

The problems:
• The old covers cracked because there was no flex built in.
• The shaft opening needed to stay tight for an O-ring seal.
• Mounting and waterproofing to the yacht was difficult.

Our solution:
• Scanned and redesigned the existing cover.
• Enlarged the shaft hole and added a flange.
• Designed a waterproof sleeve that seals tightly on the ram shaft and compresses neatly when under load.

Another engineering headache solved — one more yacht dry, tight, and dialed by Cerberus Marine

#cerberusmarine #yachtengineering #rigging #3Dscan #customdesign #boatlife #yachtmaintenance #marineinnovation #harken #superyacht #underpromiseandoverdeliver

Fixing a tricky one onboard Yam2

We were asked to solve an ongoing issue with the waterproof covers over the large @harken_inc backstay rams. When those rams load up, the shaft moves — and the original covers didn’t allow for that movement.

The problems:
• The old covers cracked because there was no flex built in.
• The shaft opening needed to stay tight for an O-ring seal.
• Mounting and waterproofing to the yacht was difficult.

Our solution:
• Scanned and redesigned the existing cover.
• Enlarged the shaft hole and added a flange.
• Designed a waterproof sleeve that seals tightly on the ram shaft and compresses neatly when under load.

Another engineering headache solved — one more yacht dry, tight, and dialed by Cerberus Marine

#cerberusmarine #yachtengineering #rigging #3Dscan #customdesign #boatlife #yachtmaintenance #marineinnovation #harken #superyacht #underpromiseandoverdeliver

Just over 3 weeks ago we kicked off a special project for the sailing yacht Whisper. The service team needed a set of solid, reliable cradles to support her monster boom during service — and that’s where we stepped in.

🔹 Step 1: 3D scanned the boom twice to capture precise sectional profiles
🔹 Step 2: Designed custom cradles to fit perfectly
🔹 Step 3: Sent files to @7starmarine for water cutting
🔹 Step 4: Quick, clean assembly — job done ✅

Big thanks to @worldsparservice for bringing Cerberus Marine onboard to tackle this challenge. Another smooth collaboration, another monster project supported.

#CerberusMarine #Whisper #Superyacht #BoomSupport #MarineEngineering #3DScanning #CustomDesign #YachtService

Just over 3 weeks ago we kicked off a special project for the sailing yacht Whisper. The service team needed a set of solid, reliable cradles to support her monster boom during service — and that’s where we stepped in.

🔹 Step 1: 3D scanned the boom twice to capture precise sectional profiles
🔹 Step 2: Designed custom cradles to fit perfectly
🔹 Step 3: Sent files to @7starmarine for water cutting
🔹 Step 4: Quick, clean assembly — job done ✅

Big thanks to @worldsparservice for bringing Cerberus Marine onboard to tackle this challenge. Another smooth collaboration, another monster project supported.

#CerberusMarine #Whisper #Superyacht #BoomSupport #MarineEngineering #3DScanning #CustomDesign #YachtService

Big Rig Monday
We’ve been called in by Yam2 to strip every terminal off their monster rig. 🏗️
Why? To give the threads a deep clean before sending them for NDT + dye testing—making sure there are no hidden gremlins lurking 👀⚡️
Next stop: New Zealand 🇳🇿

#BigRigMonday #CerberusMarine #RiggingLife #YachtRigging #SailingTeam #NDTTesting #Superyacht

Big Rig Monday
We’ve been called in by Yam2 to strip every terminal off their monster rig. 🏗️
Why? To give the threads a deep clean before sending them for NDT + dye testing—making sure there are no hidden gremlins lurking 👀⚡️
Next stop: New Zealand 🇳🇿

#BigRigMonday #CerberusMarine #RiggingLife #YachtRigging #SailingTeam #NDTTesting #Superyacht

Meet our New Sports Boat EZreeler
Compact, durable, and purpose-built for performance.

Designed to handle 15m of 5mm line or 12m of 6mm line, the EZreeler is manufactured from materials engineered to withstand the most demanding marine environments.

Now available with a new side-mounting feature, the EZreeler can be installed on a vertical plane as well as with the standard mounting option — providing greater flexibility for small boat applications.

Lightweight, reliable, and built to perform at sea.

#EZreeler #CerberusMarine #SmallBoatSailing #RiggingSolutions #MarineInnovation #builtfortheseason @etchellsclass @etchellsna @etchellsuk

Meet our New Sports Boat EZreeler
Compact, durable, and purpose-built for performance.

Designed to handle 15m of 5mm line or 12m of 6mm line, the EZreeler is manufactured from materials engineered to withstand the most demanding marine environments.

Now available with a new side-mounting feature, the EZreeler can be installed on a vertical plane as well as with the standard mounting option — providing greater flexibility for small boat applications.

Lightweight, reliable, and built to perform at sea.

#EZreeler #CerberusMarine #SmallBoatSailing #RiggingSolutions #MarineInnovation #builtfortheseason @etchellsclass @etchellsna @etchellsuk

We’re excited to introduce the latest evolution of our EZ Reeler range.

This new model features an upgraded overdrive system, delivering increased drum rotation with minimal effort on the pull cord. Engineered specifically for 6mm line and up to 20 meters in length, it’s compact, efficient, and built for performance.

This particular unit is headed to the @52superseries , where it will serve as a dedicated tack line reeler. Its proven frictionless deployment and now enhanced rapid retrieval make it a standout solution on the water.

Weighing just over 1kg, this lightweight unit is available for $1,200. Custom color options are available upon request.

Send us a DM to learn more or place your order.
#rope #reeler #3dprinting #spin #3dprinted #pump #marine #sailing #carbon

We’re excited to introduce the latest evolution of our EZ Reeler range.

This new model features an upgraded overdrive system, delivering increased drum rotation with minimal effort on the pull cord. Engineered specifically for 6mm line and up to 20 meters in length, it’s compact, efficient, and built for performance.

This particular unit is headed to the @52superseries , where it will serve as a dedicated tack line reeler. Its proven frictionless deployment and now enhanced rapid retrieval make it a standout solution on the water.

Weighing just over 1kg, this lightweight unit is available for $1,200. Custom color options are available upon request.

Send us a DM to learn more or place your order.
#rope #reeler #3dprinting #spin #3dprinted #pump #marine #sailing #carbon

Putting the new reeler mechanics through their paces before installing a pair of mini carbon JAX next week for some serious runner tail clean-up! Stay tuned for the next reelers update straight from the battlefield.
#underpromiseandoverdeliver #rope #reeler #3dprinting #spin #3d #3dprinted #pump #marine #sailing #clean #gettingitdone
#marineinnovation #riggingsolutions

Putting the new reeler mechanics through their paces before installing a pair of mini carbon JAX next week for some serious runner tail clean-up! Stay tuned for the next reelers update straight from the battlefield.
#underpromiseandoverdeliver #rope #reeler #3dprinting #spin #3d #3dprinted #pump #marine #sailing #clean #gettingitdone
#marineinnovation #riggingsolutions

We were flown in to carry out a shroud pennant replacement onboard @argoracing’s Mod70. With signs of minor chafe showing, there’s no room for risk—especially with a canting rig. Big thanks to @spenserrigging for helping bed in the splices to 10 tonnes on their test bed, ensuring the 16mm SK99 from @gottifredimaffioli was cut to the perfect length. We finished the job with a fully covered pennant, ready to go for tomorrow’s test sail. Good luck out there, lads!
!!!! #rope #maderight #doingwhatittakes #nextlevel

We were flown in to carry out a shroud pennant replacement onboard @argoracing’s Mod70. With signs of minor chafe showing, there’s no room for risk—especially with a canting rig. Big thanks to @spenserrigging for helping bed in the splices to 10 tonnes on their test bed, ensuring the 16mm SK99 from @gottifredimaffioli was cut to the perfect length. We finished the job with a fully covered pennant, ready to go for tomorrow’s test sail. Good luck out there, lads!
!!!! #rope #maderight #doingwhatittakes #nextlevel

Sometimes the hard miles are what it takes to find the perfect solution. The old setup had seen enough miles to earn its retirement, so we replaced it. We ran six laps of @gottifredimaffioli 4mm SK99 to create the smallest possible loop for the lead rings feeding into the @harken_inc 990 winches aboard @argoracing !!!!
#rope #doingitforthelads #loop #32t

Sometimes the hard miles are what it takes to find the perfect solution. The old setup had seen enough miles to earn its retirement, so we replaced it. We ran six laps of @gottifredimaffioli 4mm SK99 to create the smallest possible loop for the lead rings feeding into the @harken_inc 990 winches aboard @argoracing !!!!
#rope #doingitforthelads #loop #32t

Our latest prototype is heading to the UK next week for testing in the Solent. It’s stronger, lighter, and built to handle the demands of offshore life. Looking forward to seeing how it performs in real conditions.
#rope #reeler #carbonfibre #carbon #spin #pulling

Our latest prototype is heading to the UK next week for testing in the Solent. It’s stronger, lighter, and built to handle the demands of offshore life. Looking forward to seeing how it performs in real conditions.
#rope #reeler #carbonfibre #carbon #spin #pulling

This 8/10mm reeler with 35m capacity is a total game changer! 💪 Used it on the @cape31class for kite sheets and halyards—seriously reliable and tough. Can’t recommend it enough! ⛵️🙌
#cape31class #3d #3dprinted #made #smallbusiness #marine #rope

This 8/10mm reeler with 35m capacity is a total game changer! 💪 Used it on the @cape31class for kite sheets and halyards—seriously reliable and tough. Can’t recommend it enough! ⛵️🙌
#cape31class #3d #3dprinted #made #smallbusiness #marine #rope

Just got home from a great couple of weeks with the lads at @argoracing putting the mighty Mod70 back together after a solid winter refit! She went back together great and managed 38 knots on our shake down sail so a real testament to the full squad @chadcorning @maxtedc @w_barlow @iyamez @rip_stoke_trade @alisterdonk @pete_cumming . I appreciate all the help everyone gave me to get the new @gottifredimaffioli rope package across the finish line and getting the good ship ready for all the record attempts to come!
#rope #tri #fast #wet #mean #team #uk #summer

Just got home from a great couple of weeks with the lads at @argoracing putting the mighty Mod70 back together after a solid winter refit! She went back together great and managed 38 knots on our shake down sail so a real testament to the full squad @chadcorning @maxtedc @w_barlow @iyamez @rip_stoke_trade @alisterdonk @pete_cumming . I appreciate all the help everyone gave me to get the new @gottifredimaffioli rope package across the finish line and getting the good ship ready for all the record attempts to come!
#rope #tri #fast #wet #mean #team #uk #summer

Another batch of reelers heading to Europe to the @cape31class sold by our UK dealer @31northyachting we have x2 for kite sheets reelers x1 for the spin halyard reeler and the little blue one is for the drop line. Reach out if you would like more information.
#spin #takeaway #3dprinted #engineering #frictionless

Another batch of reelers heading to Europe to the @cape31class sold by our UK dealer @31northyachting we have x2 for kite sheets reelers x1 for the spin halyard reeler and the little blue one is for the drop line. Reach out if you would like more information.
#spin #takeaway #3dprinted #engineering #frictionless

Fun little pack up of the Maxi72 rig heading to Australia to its new home. We got asked to come in and get it ready for shipping and load it on the trailer so that’s what we! All in a days work for my self and @dudleyalan.
#shipping #packing #wrapping #movingday #usa

Fun little pack up of the Maxi72 rig heading to Australia to its new home. We got asked to come in and get it ready for shipping and load it on the trailer so that’s what we! All in a days work for my self and @dudleyalan.
#shipping #packing #wrapping #movingday #usa

Here we have a 5ft 7ft and 10ft strops with a 40,000kg break load and just a little over a 3 time Saftey factor baked into the cake.These strops are made up of 100% @gottifredimaffioli products there is 3 laps of 8mm sk99 inside these bad boys. For a size comparison there is a m32 KZ furler strop next to them. These strops will be used on @midtownracingusa new crane setup. Next stop for these strop is the painting bench where they will be turned orange to match Midtowns racing colors!
#rope #core #orange #racing #rigging #crane #lifting

Here we have a 5ft 7ft and 10ft strops with a 40,000kg break load and just a little over a 3 time Saftey factor baked into the cake.These strops are made up of 100% @gottifredimaffioli products there is 3 laps of 8mm sk99 inside these bad boys. For a size comparison there is a m32 KZ furler strop next to them. These strops will be used on @midtownracingusa new crane setup. Next stop for these strop is the painting bench where they will be turned orange to match Midtowns racing colors!
#rope #core #orange #racing #rigging #crane #lifting

Whilst building some @m32official code zero mast head strops today I thought I’d take some photos of the different stages that go into making these little guys enjoy! We are using @gottifredimaffioli core and chafe cover to maximize strength and durability. These small but mighty strops have a 3 time safety factor and a theatrical BL of 6T. We are also using a @ti64_titanium dog bone to connect it all together.
#rope #titanium #splice #rigged #catameran #madeinamerica

Whilst building some @m32official code zero mast head strops today I thought I’d take some photos of the different stages that go into making these little guys enjoy! We are using @gottifredimaffioli core and chafe cover to maximize strength and durability. These small but mighty strops have a 3 time safety factor and a theatrical BL of 6T. We are also using a @ti64_titanium dog bone to connect it all together.
#rope #titanium #splice #rigged #catameran #madeinamerica

Here we have the new service provided by @cerberus_marine deck gear and hard wear servicing we have been doing all sorts of cleaning this week from tp52 mast parts to classic yacht parts that were thought to be dead! #clean #ultrasonic #simple #cleanthreads #metal #stainless #steel #usa

Here we have the new service provided by @cerberus_marine deck gear and hard wear servicing we have been doing all sorts of cleaning this week from tp52 mast parts to classic yacht parts that were thought to be dead! #clean #ultrasonic #simple #cleanthreads #metal #stainless #steel #usa

Heres your on water winch service kit perfect for a quick winch repair! If you know you know!!!! #harken #winch #spin #loob #allenkey #flathead

Heres your on water winch service kit perfect for a quick winch repair! If you know you know!!!! #harken #winch #spin #loob #allenkey #flathead

They just keep on getting ordered and we keep on building them in some really cool colors! #reeler #madeintheusa #3dprintingworld #3dprinting #3d

They just keep on getting ordered and we keep on building them in some really cool colors! #reeler #madeintheusa #3dprintingworld #3dprinting #3d

Here we have it the Boat yard tool kit!!! With @weratoolrebels @knipex_official tools only the best for your boat!!! $1500 for the kit that will set you up for success. #tools #mobile #usa #package #deal

Here we have it the Boat yard tool kit!!! With @weratoolrebels @knipex_official tools only the best for your boat!!! $1500 for the kit that will set you up for success. #tools #mobile #usa #package #deal

ULTIMATE RIGGING KIT FOR SALE!!!!! This is my everyday tools and in my opinion the only tools you need to be successful in rigging other than a winch! Message us for me info! #rigging #rope #splice #leatherman #tape #marlow #fid #lighter #tapemeasure #calapers #carabeaner #hammer #superglue #scissors #knife

ULTIMATE RIGGING KIT FOR SALE!!!!! This is my everyday tools and in my opinion the only tools you need to be successful in rigging other than a winch! Message us for me info! #rigging #rope #splice #leatherman #tape #marlow #fid #lighter #tapemeasure #calapers #carabeaner #hammer #superglue #scissors #knife

This one has been ask for a lot by the @etchellsclass as well as some other one design classes. We have the perfect solution for your jib and spinnaker halyards after you have hoisted the sails and need to get rid of the tails! As shown by the drill it’s small and compact with a foot print of 130mmX150mmX150mm this really is as small as you can get!!!!#tail #sail #reels #supersmall #cleanup #3dprinting #cerberus #pump #mini #rope

This one has been ask for a lot by the @etchellsclass as well as some other one design classes. We have the perfect solution for your jib and spinnaker halyards after you have hoisted the sails and need to get rid of the tails! As shown by the drill it’s small and compact with a foot print of 130mmX150mmX150mm this really is as small as you can get!!!!#tail #sail #reels #supersmall #cleanup #3dprinting #cerberus #pump #mini #rope

Can you spot the difference!!!!!!!!!!!
The New EZ mini pump is ready for your sports boat needs! Taking up 20m of 6mm line this little unit is great for halyards, sheets and down lines.#mini #ez #pump #3d #3dprinting #bambu

Can you spot the difference!!!!!!!!!!!
The New EZ mini pump is ready for your sports boat needs! Taking up 20m of 6mm line this little unit is great for halyards, sheets and down lines.#mini #ez #pump #3d #3dprinting #bambu

ON SALE NOW!!!!!! After a couple of months testing we are finally happy to put up for SALE our new EZ pump reeler!!!!!!! This one you see is designed for 8mm line up to 40m but the best thing about this design is it’s fully customizable to your needs!!!!! Send us a message for pricing and any information you’re looking for! #forsale #buynow #addtocart #dontwait #reeler #ez #pump

ON SALE NOW!!!!!! After a couple of months testing we are finally happy to put up for SALE our new EZ pump reeler!!!!!!! This one you see is designed for 8mm line up to 40m but the best thing about this design is it’s fully customizable to your needs!!!!! Send us a message for pricing and any information you’re looking for! #forsale #buynow #addtocart #dontwait #reeler #ez #pump

Another set of reelers heading to the UK for some epic offshore testing next week! Videos of them installed and working to follow! All new bearings working a treat #reeler #spin #sport #cleaning #argo #racing

Another set of reelers heading to the UK for some epic offshore testing next week! Videos of them installed and working to follow! All new bearings working a treat #reeler #spin #sport #cleaning #argo #racing

Onboard @summerstormracing testing out the new EZ pull reeler that’s cleaning up and managing the jib halyard. So far it’s working great but today it gets used in anger 😡!!!!! #sailing #jib #pulling #madeinamerica #anger #fingerscrossed

Onboard @summerstormracing testing out the new EZ pull reeler that’s cleaning up and managing the jib halyard. So far it’s working great but today it gets used in anger 😡!!!!! #sailing #jib #pulling #madeinamerica #anger #fingerscrossed

We have had a lot of questions about why you need the override bar and nappy flappy. In these videos you can see short sharpe pulls of the line and how the reeler manages the free spin and excess released rope. This reeler is one of two getting tested onboard @tquilaracing @alisterdonk @assoclass40 for there spin sheets tidy up. #reeler #pull #tugofwar #class40sailing #madeinamerica #3dprint #3dprinting

We have had a lot of questions about why you need the override bar and nappy flappy. In these videos you can see short sharpe pulls of the line and how the reeler manages the free spin and excess released rope. This reeler is one of two getting tested onboard @tquilaracing @alisterdonk @assoclass40 for there spin sheets tidy up. #reeler #pull #tugofwar #class40sailing #madeinamerica #3dprint #3dprinting

Latest upgrade was a must needed over ride bar to prevent the sheet from falling over the edge of the reeler and the nappy flap to help add a small amount of friction to help keep the rolls of rope tight to the drum! This unit is off to France for a trip around the world in the @vendeeglobe racing! #solo #sailing #drum #override #nappy #flapper

Latest upgrade was a must needed over ride bar to prevent the sheet from falling over the edge of the reeler and the nappy flap to help add a small amount of friction to help keep the rolls of rope tight to the drum! This unit is off to France for a trip around the world in the @vendeeglobe racing! #solo #sailing #drum #override #nappy #flapper

Todays mission took me to Massachusetts to scan this bad ass EVO she’s getting ready to under go so massive upgrades ready for next season

Todays mission took me to Massachusetts to scan this bad ass EVO she’s getting ready to under go so massive upgrades ready for next season

The Development is a fun but time consuming process we are on version 3 of the pump reeler with new stainless steel bearing giving an easy to pull and effortless free spin on the unwinding! #spin #unwind #3d #printing #madeinusa

The Development is a fun but time consuming process we are on version 3 of the pump reeler with new stainless steel bearing giving an easy to pull and effortless free spin on the unwinding! #spin #unwind #3d #printing #madeinusa

We have been busy testing and developing the new EZ pump for line lengths longer than 20m great for sheets and halyards!!!
#pump #ez #engine #pullstart #pull

We have been busy testing and developing the new EZ pump for line lengths longer than 20m great for sheets and halyards!!!
#pump #ez #engine #pullstart #pull

Here we have the Ez mini reeler 15m installed on the mighty beautiful Jax. They will be using the EZ mini reeler for a tack line take up system utilizing the recoil of the 15m spring allowing them to pull the tack line out and it to automatically clean the pit area up for them!!!
#cleaning #ropes #away #3dprinting #fancy

Here we have the Ez mini reeler 15m installed on the mighty beautiful Jax. They will be using the EZ mini reeler for a tack line take up system utilizing the recoil of the 15m spring allowing them to pull the tack line out and it to automatically clean the pit area up for them!!!
#cleaning #ropes #away #3dprinting #fancy

Excited to announce Cerberus Marine will be attending the Newport Boat Show, September 12-15th! Come check us out at Tent D Booth 15 in partnership with @newenglandropes and see the new EZ REELERS in action. #newportboatshow #newportri

Excited to announce Cerberus Marine will be attending the Newport Boat Show, September 12-15th! Come check us out at Tent D Booth 15 in partnership with @newenglandropes and see the new EZ REELERS in action. #newportboatshow #newportri

Busy week in and out of the work shop x6 more reeler have left the shop and off to there new homes. We built some ropes dressed a rig and scanned some Volvo 70 daggerboards and bearings. All in a weeks work at Cerberus marine. #getitdone #fun #work #epic

Busy week in and out of the work shop x6 more reeler have left the shop and off to there new homes. We built some ropes dressed a rig and scanned some Volvo 70 daggerboards and bearings. All in a weeks work at Cerberus marine. #getitdone #fun #work #epic

Here we have our glue on nut mounts built with a stainless steel m3/4/5 nut inside. Perfect for glueing and mounting electrical parts to your yacht or our EZ REELER! #skyhook #mount #glue #nut

Here we have our glue on nut mounts built with a stainless steel m3/4/5 nut inside. Perfect for glueing and mounting electrical parts to your yacht or our EZ REELER! #skyhook #mount #glue #nut

Another install done by the crew on @warriorwoncape31 looking good team!!!!! #spinning #réel #rotate #happycustomers

Another install done by the crew on @warriorwoncape31 looking good team!!!!! #spinning #réel #rotate #happycustomers

With our new Ez mini reeler 15 you can take up 50feet of line in less than 3 seconds just by opening the ratchet up and letting it fly! #fast #speed #3second #3dprinting

With our new Ez mini reeler 15 you can take up 50feet of line in less than 3 seconds just by opening the ratchet up and letting it fly! #fast #speed #3second #3dprinting

Heading into the weekend with a bench full of reelers! Check out our shop in the bio and take a look at pricing and sizing! #sailing #boating #marine #selling #buying #3dprinted #reeler

Heading into the weekend with a bench full of reelers! Check out our shop in the bio and take a look at pricing and sizing! #sailing #boating #marine #selling #buying #3dprinted #reeler

EZ mini reeler doing its thing in testing on the work bench. This little unit is pulling in 15m of 5mm control line using our built in recoil system. Over the 15m you can stop at any point using the stop start mechanism on the side of the unit. To find out more don’t hesitate to fire us a message!! #rope #marine #spin #réel #madeinusa #3dprinted #takeup #cleaning

EZ mini reeler doing its thing in testing on the work bench. This little unit is pulling in 15m of 5mm control line using our built in recoil system. Over the 15m you can stop at any point using the stop start mechanism on the side of the unit. To find out more don’t hesitate to fire us a message!! #rope #marine #spin #réel #madeinusa #3dprinted #takeup #cleaning

Mini reeler is here fully self contained no more blocks and bungee down below just this unit!! It’s fully customizable for size of line and amount of rope that’s needed to be reeled up! Message me for details!!
#reeler #3d #3dmodeling #rope #spinning

Mini reeler is here fully self contained no more blocks and bungee down below just this unit!! It’s fully customizable for size of line and amount of rope that’s needed to be reeled up! Message me for details!!
#reeler #3d #3dmodeling #rope #spinning

Little rebuild and redesign of a Mercs front fender panel. The owner no longer needed a license plate on the front so we faired that out and made him this new one. Off for fitting this weekend and we will get the real on built soon! #car #automobile #classiccar #rebuild #redesign #plastic #3dprinted

Little rebuild and redesign of a Mercs front fender panel. The owner no longer needed a license plate on the front so we faired that out and made him this new one. Off for fitting this weekend and we will get the real on built soon! #car #automobile #classiccar #rebuild #redesign #plastic #3dprinted

We have been working closely with @mcmillenyachts to create a new set of stanchions for one of there beautiful classic boats Miss Asia. Here you can see a 3d printed stanchion that is 3% larger than the finished brass stanchions to allow for the shrinkage we needed to make a middle aluminum stanchion because the shrinkage was going to be to great so that one came in at 1.5%. All in all very happy to have this project under our belts and we get ready for the next mission the hatch! #casting #brass #3dprinting #madeinusa #missasia #boat #yacht #motorboat #stanchions #metal #project

We have been working closely with @mcmillenyachts to create a new set of stanchions for one of there beautiful classic boats Miss Asia. Here you can see a 3d printed stanchion that is 3% larger than the finished brass stanchions to allow for the shrinkage we needed to make a middle aluminum stanchion because the shrinkage was going to be to great so that one came in at 1.5%. All in all very happy to have this project under our belts and we get ready for the next mission the hatch! #casting #brass #3dprinting #madeinusa #missasia #boat #yacht #motorboat #stanchions #metal #project

Fun quick turn around project for @newportrigginggroup I used my @artec3d Eva today to scan this in boom Furler part that had cracked. Being a black part it’s very hard to pick up with the scanner so I used @aesub_scanningspray to really help Pick up all the details needed to reverse engineer it. A quick drawing on @geomagicdesignx and off to the @bambulab_official printer to get the part test fitted before sending off to get built! #3dscanning #spray #plastic #3dprinted #cnc

Fun quick turn around project for @newportrigginggroup I used my @artec3d Eva today to scan this in boom Furler part that had cracked. Being a black part it’s very hard to pick up with the scanner so I used @aesub_scanningspray to really help Pick up all the details needed to reverse engineer it. A quick drawing on @geomagicdesignx and off to the @bambulab_official printer to get the part test fitted before sending off to get built! #3dscanning #spray #plastic #3dprinted #cnc

It’s been a fun project getting this hatches hole scanned and modeled for this new custom hatch to fit for @mcmillenyachts . We will be casting the reel hatch out of bronze. We used all our skills to create the perfect fitting hatch then we increased the size by 2.8% allowing for shrinkage from the bronze is cast. We used our friends at @newportyachtbuilders to cut the hatch using there cnc machine and a beautiful job they did, What you can’t see is all the letters have a 7 degree chamfer to allow the sand to form and not get stuck when making the cast mold! Lots has been learnt and looking forward to our next mission poring the hatch! #bronze #cast #cnc #wood #poring #3dprinted #3dscanning

It’s been a fun project getting this hatches hole scanned and modeled for this new custom hatch to fit for @mcmillenyachts . We will be casting the reel hatch out of bronze. We used all our skills to create the perfect fitting hatch then we increased the size by 2.8% allowing for shrinkage from the bronze is cast. We used our friends at @newportyachtbuilders to cut the hatch using there cnc machine and a beautiful job they did, What you can’t see is all the letters have a 7 degree chamfer to allow the sand to form and not get stuck when making the cast mold! Lots has been learnt and looking forward to our next mission poring the hatch! #bronze #cast #cnc #wood #poring #3dprinted #3dscanning

Taste the rainbow🌈

#3dprinting #cerberus3dscanning #3dscanning

Taste the rainbow🌈

#3dprinting #cerberus3dscanning #3dscanning

Mast base rebuild after a small miss hap. We were called in to scan the new finished mast base and reconstruct a new mast butt for this beautiful rig! #carbon #mast #cnc #machine #scan #3d

Mast base rebuild after a small miss hap. We were called in to scan the new finished mast base and reconstruct a new mast butt for this beautiful rig! #carbon #mast #cnc #machine #scan #3d

Busy week of printing and design work! Building GoPro mounts and stanchions for @mcmillenyachts along side scanning and drawing a sweet little wake boarding boat that getting some upgrades down to it.
#gopro #scan #3dmodeling #3drender #3dprinted #engineer #workshop

Busy week of printing and design work! Building GoPro mounts and stanchions for @mcmillenyachts along side scanning and drawing a sweet little wake boarding boat that getting some upgrades down to it.
#gopro #scan #3dmodeling #3drender #3dprinted #engineer #workshop

🦔 Getting used to the boat!!!! @j70class @hedgehogsailing @team_convergence #gopro #3d #3dprinted #smallbusiness

🦔 Getting used to the boat!!!! @j70class @hedgehogsailing @team_convergence #gopro #3d #3dprinted #smallbusiness

3rd batch of @j70class GoPro mounts out the door and onto their new homes! #gopro #carbon #3dprinting #smallbusiness

3rd batch of @j70class GoPro mounts out the door and onto their new homes! #gopro #carbon #3dprinting #smallbusiness

.pro-gallery-wix-wrapper {display: block !important;} .pro-gallery-wix-wrapper .gallery-item-container {opacity: 1 !important; display: block !important;}

Cerberus Marine

© 2025 Cerberus Marine LLC. All Rights Reserved. Powered By Pros

Quick Links

About Us
3D Scanning
3D Printing
Rigging
Hardware Servicing
Case Studies
Shop

Our Office

Unit 8b 200 High Point Ave Portsmouth RI 02871

Contact Us

Cerberus.marine.llc@gmail.com
987 631 6528

Follow Us

bottom of page